CARBON TECH ΡΙΝΤΟΦΥΛΛΑ ΣΕΤ ΓΙΑ SEA-DOO 951CC / ALL 951 MODELS / 97-07, CT206HT

Nicolas Rius has been the World Champion for the last two years.
The only reeds he uses are Carbon Tech reeds.

Why? Because our reeds work. Not only do they work, they last. Watercraft engines create alot of horsepower very rapidly, and the reeds need to be able to keep up with the demanding motor. Carbon Tech reeds hold up longer than any reed available. And, our reeds are available in different tensions for different powerbands, that you get to pick. Low Tension (LT) reeds are designed for low end power, Mid Tension (MT) for mid range power, and High Tension (HT) reeds for top end power. Either way you go, you will feel confident knowing you have the best reed available in your motor.

INSTALLATION

1. Clean engine around carbuerator and intake manifold to prevent dirt from falling into your engine.

2. Remove carbuerator and intake manifold.

3. Remove reed cage.

4. Remove stock reed stops and reeds.

5. Place new Carbon Tech reeds on reed cage. Carbon Tech reeds are built with a slight curvature to ensure proper sealing. Try flipping them both ways to see which way seals better. Small gaps between the reeds and reed cage will not affect performance.

6. Reinstall stock reed stops. They will increase the life of your reeds and control reed opening to provide maximum power. We do not recommend the use of thread locker on the screws. If you use it, use it sparingly. Excessive thread locker will seep out and cause the reeds not to seal.

7. Reinstall the reed block using a new gasket if required.

8. Reinstall carbuerator and intake manifold.

9. Start engine and check for air leaks

10. Carbon Tech reeds will not cause major changes to jetting. In a few motors, low speed jetting will be richened slightly; Install one size smaller pilot jet (flatside)or one half turn leaner or low speed screw (watercraft). Adjust your carbuerator for maximum performance.

Note: All the porting and trickest parts in the world will not make up for a poorly maintained engine. Get your engine in excellent running condition before trying to modify it.